Hi Butch I checked with Mr. Murphy and he suggests keep it small 360 degrees. I have followed Mr. Murphy's advice and no trouble in over 15 years. North is my stop on the rotor. 73 Bob W7LRD
On June 26, 2018 at 1:12 PM Butch via AMSAT-BB amsat-bb@amsat.org wrote:
I have no operating experience with satellites.
I am installing this G-5500 az-el rotator on a satellite ground station and I am using SatPC32 tracking software and an ERC interface. Everything is operational, so far...
I am trying to decide whether to use 0 to 360 degrees or 0 to 420 degrees on the azimuth rotator. The station is located in Eastern TN, USA. The 0 to 420 uses all available rotation but then the meter readings are not as useful. Are there any preferences on this?
From a practical, operating point of view, should the azimuth mid point or home position have the antenna pointed North or South? Or some other direction?
Thanks for your input.
Butch K8KO _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb