I know this is super-basic, but did you click on the "C-" (turning it to "C+") in the upper left portion of the program window to enable computer control of the radio?
George, KA3HSW
<-----Original Message----- <From: amsat-bb-bounces@amsat.org <[mailto:amsat-bb-bounces@amsat.org] On Behalf Of Keith McDonnell <Sent: Thursday, May 01, 2014 7:48 PM <To: "amsat-bb@amsat.org"@optonline.net <Subject: [amsat-bb] Pcsat32 doppler problem < <" amsat-bb@amsat.org <Content-Transfer-Encoding: quoted-printable <Mime-Version: 1.0 (1.0) < <I know I'm missing something simple but I just cant find it. I <have pcsat32 r= <unning under windows 7 to controll my kenwood ts-2000. If i <click on a satel= <lite, the rig goes to the appropriate mode and frequency. The <program then s= <tarts the doppler adjustment but the frequency on the rig <never changes. If I= < turn the tuning knob on the rig, the new frequency doesnt <transfer to the p= <rogram. I have another control program which works fine, so <the hardware is i= <ntact, so its something i have done wrong in the set up. I <have checked baud= < rate, com ports and such and all are correct. Thank you for <all your help. 7= <3, keith kg2ix=