20 Feb
2008
20 Feb
'08
4:02 p.m.
You used it backwards then,, it can't pull out through the board,
If you push it in from say the left side, then the bolt goes in through the right side.
Pulling the T Nut even tighter into the wood,
you'd have to pull it completely through the wood,
Joe
Scott Richardson wrote:
Use a "T Nut"
I just tried a T nut here. It pulled out of the wood boom almost as soon as it was mounted on the tripod. Looking forward to plan B. Meanwhile, handholding one and propping the other on the wall.
Scott N1AIA