Note that the FoxDelta box is pretty much a clone of the old and no-longer-available AMSAT box, which in turn was compatible with the commands for the GS-232. I believe I have successfully used both GS-232 and SabreTrack settings on SatPC32 with the AMSAT box, but it's been a while since I have used it. I don't recall why I tried both of them and if there was an issue with one or the other. In any case, I'm suggesting that probably either one will work. But it should be no big deal to try one, and if it does not work switch to the other.
73,
Burns WB1FJ
On Fri, Jul 28, 2023 at 9:59 AM Don KB2YSI via AMSAT-BB amsat-bb@amsat.org wrote:
If you need a terminal program, I suggest using Putty on Windows.
--... ...-- Don KB2YSI
On Thu, Jul 27, 2023, 16:33 Vince Fiscus, KB7ADL via AMSAT-BB < amsat-bb@amsat.org> wrote:
At 05:27 PM 7/27/2023 +0000, crohtun@aol.com wrote:
My FD interfaces SatPC32 with a Yaesu G5500DC. I am using SAEBRTrackBox
as
the SatPC32 setting. SatPC32 is running on a W11 laptop. To interface
with
FD required installation of a CH340 driver for the com port to FD.
HyperTerminal wasn’t necessary for FD installation. I didn’t have it and found that getting it and using it was more complicated than
manually
following the prompts from FD.
GL and 73,
Ray KN2K
Thanks to everyone for the advice, I just want to be up to speed for when the Fox-delta gets here. Will be using it with my old Yaesu 5400B. Still haven't found LVB command list to use with terminal program for manual testing.
KB7ADL
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org