I recall in the Mode K and A days, yagis tuned for the low end of 10m would often display very skewed patterns on 29.4 MHz.
Given your antenna is presumably tuned/designed for 435, it's pattern at 400 is likely very different.
Also, 45 degrees seems excessive for satellites unless you live in a hole, and certainly for balloons close to the horizon. I'd try 15-20 degrees.
73, Drew KO4MA
On Mar 8, 2017, at 7:09 PM, Scott scott23192@gmail.com wrote:
Hello everyone.
While my question is not directly satellite related, I hope that it's a general antenna question that might be of benefit for satellite reception as well.
I have developed an interest in tracking the 400 MHz radiosonde transmitters used by the (U.S.) National Weather Service office on the other side of the state for their twice-daily weather balloon launches. When the wind carries one anywhere in my general direction, it's a lot of fun to try to receive & decode the position & altitude telemetry being sent by the thing. Maybe one day I'll even hit the road and track one down!
Anyway, my question is in regard to the pointing of my antenna, which is a 70cm X-Quad connected for RHCP. The elevation is fixed at 45°.
I have confirmed that my antenna is pointing in the compass direction indicated by the indoor control box. The radiosonde is telling me via telemetry what its location is. From that, it's easy enough to plot on Google Earth and see exactly what the compass heading is from my location to the balloon at any given time.
The catch, even considering the ~ 10° declination at my location, is that it's very common for me to receive a MUCH stronger signal with my antenna pointing 45 or 90 degrees away from what should be the correct heading! I sweep back and forth and it varies... and also depends on how close the balloon is to my location. But for much of a flight, especially at greater distance, it's quite common to receive a huge signal off-heading... where if I point directly at the transmitter, it's barely out of the noise.
I don't know if this is a polarity issue, an issue caused by the transmitter wildly swinging around under the balloon (much like a tumbling satellite?), or an issue caused by the characteristics of my particular antenna.
So that's my dilemma; I can't tell you anything about the TX side because for this particular aspect of the hobby, I'm only concerned with reception. But is there any legitimate reason for me to be seeing these massive differences in receive SNR when I am turned so far away from the transmit source? Anyone ever seen this in other situations?
Thanks!
-Scott, K4KDR Montpelier, VA USA _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb