Ted,
Ah, will need to add the VFO/Mem button to my things to check. I changed rigs 2 years ago, and I forget some of the gotchas.
The Mode setting is correct. Doppler Shift is fine, and probably more intuitive for most.
73s,
Alan WA4SCA
<-----Original Message----- <From: Ted [mailto:k7trkradio@charter.net] <Sent: Sunday, December 01, 2013 3:59 PM <To: APBIDDLE@mailaps.org; 'AMSAT-BB' <Cc: 'CC' <Subject: RE: [amsat-bb] Re: FW: SATPC32 & AO73 question < <Thanks Alan, < <All of those items are as they should be. I did end up pushing <the vfo/m <button and something changed. The freqs are where they should be and <holding. Radio and program are displaying the same numbers < <Question on a setting: under Mode, 'uplink+downlink' checked <and 'doppler <shift' checked...is that ok? < <Thanks again < <73, Ted < <-----Original Message----- <From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On <Behalf Of Alan <Sent: Sunday, December 01, 2013 11:25 AM <To: 'AMSAT-BB' <Cc: CC <Subject: [amsat-bb] Re: FW: SATPC32 & AO73 question < <Ted, < <Some questions. < <Does this problem only happen on AO-73, or all of them? <In the Radio Setup, do you have Satellite Mode (Satelliten <Modus) checked? <Is the SAT mode light on under CAT control? <Do you have the FT-847 TRACK mode selected? If so, turn it off as in <conflicts with the CAT control. < <Are you using a USB dongle for a serial port? What is the CAT <port delay? < <73s, < <Alan <WA4SCA < < < <<-----Original Message----- <<From: amsat-bb-bounces@amsat.org <<[mailto:amsat-bb-bounces@amsat.org] On Behalf Of Ted <<Sent: Sunday, December 01, 2013 12:44 PM <<To: 'AMSAT-BB' <<Subject: [amsat-bb] FW: SATPC32 & AO73 question < <Any help <appreciated < <<73, Ted < <-----Original Message----- <<From: amsat-bb-bounces@amsat.org <[mailto:amsat-bb-bounces@amsat.org] On <<Behalf Of Ted <<Sent: Friday, November 29, 2013 2:23 PM <<To: 'AMSAT-BB' <<Subject: [amsat-bb] SATPC32 & AO73 question < <Hi all, < < < <<In spite of <my usual ineptness with this program, I have <managed to have <it <talking to <my FT-847, downloaded the keps for AO73 and appear <to be <tracking <it!! << << << <<However, I can't seem to get the radio to hold the up/dn <<frequencies in <the <proper VFO's. I start out with the uplink showing in <VFOA, but <after a <min <or so the frequencies swap and I have to use the a><b <button <to get <them <back. << << << <<Am I missing a setting? << << << <<Any help appreciated << << << <<And Happy Thanksgiving to all << << << <<73, Ted << <<K7TRK << <<_______________________________________________ <<Sent via AMSAT-BB@amsat.org. Opinions expressed are those of <<the author. <<Not an AMSAT-NA member? Join now to support the amateur <<satellite program! <<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb << << <<_______________________________________________ <<Sent via AMSAT-BB@amsat.org. Opinions expressed are those of <<the author. <<Not an AMSAT-NA member? Join now to support the amateur <<satellite program! <<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb << < <_______________________________________________ <Sent via AMSAT-BB@amsat.org. Opinions expressed are those of <the author. <Not an AMSAT-NA member? Join now to support the amateur <satellite program! <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb < <