You mentioned that the clock stops. Upper right?
When you loaded the newer version, did you use the backup facility to restore your settings? If so, try doing a clean install, and then reconfiguring manually. Painful, but I have had something odd which was traceable eventually to a corrupted configuration file.
73,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Allen <Sent: Wednesday, February 20, 2019 18:50 PM <To: k0jm@amsat.org <Cc: amsat-bb@amsat.org <Subject: Re: [amsat-bb] SatPC32 Stalls at AOS < <Mark- <Thanks for the reply. I have sent an email to w0dhb about the availability of an <updated FlexSatPC. I note that his original download site has been taken <down. < <I have reconfigurated SatPC32 to bypass using FlexSatPC and am still <encountering the stalling of SatPC32 once a satellite passes the 0 degree <elevation threshhold. I suspect there is a setting that I have overlooked, I just <don’t know where. <Regards, <Allen KI7RM < <From: Mark D. Johns <Sent: Wednesday, February 20, 2019 3:48 AM <To: Allen <Cc: amsat-bb@amsat.org <Subject: Re: [amsat-bb] SatPC32 Stalls at AOS < <FlexSatPC current version is v.8.7.4. Your version is pretty old. You may be due <for an update. < <On Tue, Feb 19, 2019 at 23:39 Allen burrell@teleport.com wrote: < < Hi All, < For several months I have been automatically receiving frames from the Fox- <1 satellites. Typically at –3 degrees elev, the az/el sets the antenna position <correctly and the radio is tuned to the correct frequency. But lately as soon as <0 degrees el is reached, SatPC32 stalls, the clock stops and nothing further <happens until I manually click on the enabled satellite. Everything again <proceeds normally, until the next scheduled satellite reaches 0 degrees el and <SatPC32 stops. Since this error I upgraded from Ver 12.8c to 12.8d which <produced the same error. I reinstalled 12.8c but the condition persists. In <receive only mode, I’m using a Flex 1500 with FlexSatPC 7.2.2 and the <computer uses Win10 Pro with an i7 processor and 8GM RAM. CPU demand <always is less than 10%. I’m at a loss as to where to look to resolve this issue. <Any guidance is greatly appreciated. < < 73, Allen KI7RM < _______________________________________________ < Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available < to all interested persons worldwide without requiring membership. Opinions <expressed < are solely those of the author, and do not reflect the official views of AMSAT- <NA. < Not an AMSAT-NA member? Join now to support the amateur satellite <program! < Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb < <-- < <-- <Mark D. Johns <KØJM / MØGZO / ex-9H3DJ / ex-KØMDJ <Brooklyn Park, MN USA EN35hd <----------------------------------------------- <"Heaven goes by favor; if it went by merit, < you would stay out and your dog would go in." < ---Mark Twain <_______________________________________________ <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions <expressed <are solely those of the author, and do not reflect the official views of AMSAT- <NA. <Not an AMSAT-NA member? Join now to support the amateur satellite <program! <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb