** Another Rotor Design - Great Fun, Easy to Build and Very Cheap **
What is a Stepper Motor? https://learn.adafruit.com/all-about-stepper-motors
That Stepper Motor used by Thomas Doyle, W9KE http://www.tomdoyle.org/3dPrinterRotor-1/3DPrinterRotor-1.html can also be found at Adafruit (NYC) in either 5 or 12 Volt models. Holding Torque @ 12VDC: 250 gram-force*cm, 25 N*mm/ 3.5 oz-force*in The 12 Volt version of this same stepper motor used by W9KE can be found in the Icom IC-746 automatic tuner sub-assembly. http://www.adafruit.com/products/918
Mr. Carlson's Lab on YouTube Paul Carlson, VE7ZWZ Troubleshooting the Icom IC-746 (repairing that stepper motor) He notes that the "rotor" is a weak point in this stepper motor design. http://youtu.be/UdY6RhNOCWg
=== You can also use larger stepper motors, such as a NEMA 17 (also sold at Adafruit) Holding torque per phase: 2 Kg*cm, 20 N*cm/ 28 oz*in http://www.adafruit.com/product/324
w9gb
Sent from iPad Air