Using FT 847.
73 Bill
----- Original Message ----- From: "Dee" morsesat@optonline.net To: "'Bill Gillenwater'" k3sv@pa.net; "'AmsatBBS'" amsat-bb@amsat.org Sent: Saturday, January 22, 2011 11:04 AM Subject: [amsat-bb] Re: Rotor Interface Yaesu 5500
Bill, There is a nice interface being sold by AMSAT - LVB tracker box...Only need an RS232 or USB to operate it running SatPC32... You didn't mention what rig you have - you can interface with that via SatPC32 also - See the ad at the AMSAT website... Good luck, Dee, NB2F
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Bill Gillenwater Sent: Saturday, January 22, 2011 10:20 AM To: AmsatBBS Subject: [amsat-bb] Rotor Interface Yaesu 5500
OK, a newbee question about interfacing rotors. I have a Yaesu 5500 and I run PCSat32. What do I need between the rotor and the computer? I would like a few options. Do I need the Yaesu 232 interface box or will a generic box do the job. If a generic box will work, which are the best for satellite work with PCSat32?
Tnx 73 Bill K3SV _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb