Re: [amsat-bb] what's a good start freq for PSAT using DopplerPSK?

Bob,

If you are too high in the pass band / waterfall you can adjust the center frequency down a few hundred Hz in the settings file. Or just tune the VFO of the 10m radio a little until you are where you want to be on the waterfall.

I have noticed the ROBOT-Beacon does turn on the NO-84 transmitter at times. If you are not turning the satellite on, use more power. 40- 80 watts works for me most of the time. Expect your signal to be noticeably weaker than the telemetry down at 312Hz.

KO6TZ Bob

I made the last pass but was maybe 2KC higher. Also, I only see myself when the Robot-Beacon comes on.

Saw two other guys calling CQ .. Looks like they too were using DopplerPSK

One was KC4LS btw