[amsat-bb] Monitoring 9600 baud Sats with PK-96 TNC

All:

Need advice from the reflectors TNC Guru. I have a Timewave PK-96 in the shack and would like to test the modems receive capability by monitoring 9600 baud satellites.

I figured it should be possible to monitor incoming packets with a simple terminal program, but after trying Tigersat and others, I was not able to decode anything. The same radio worked fine with UZ7HO's Soundmodem.

I used the terminal program to set the TNC in 9600 bd mode and set the mon command to monitor UI frames. Maybe I'm missing something.

Tony