Michael, the automatic Doppler correction of SatPC32 updates the radio frequencies (both, uplink and downlink by default) when the Doppler shift of the higher band changed by a certain amount of Hertz (interval, selectable in menu CAT). To do so the program needs to swap the VFOs for a few milliseconds because only the frequency of the main band VFO can be changed via CAT command. BTW: This happens only while the radio is in RX mode. During tX mode the frequency corrections are delayed. 73s, Erich, DK1TB
Am 23.07.2017 um 23:56 schrieb mvivona--- via AMSAT-BB:
Hi, I have SatPC32 connected to my IC-7000 with a USB CAT cable, Win-7.I've got it controlling the radio except it has one problem. If I select lets say AO-73, It puts the radio in Split mode and enters 145.96 in the RX side and 435.14 in the TX side. That is perfect, however about ever 4 seconds it flips the frequencies putting 435.14 in the RX side and 145.96 in the TX side. It only stays there for about a nano second and flips back. It keeps doing this continuously. I have tried all the CAT delays, and intervals with no success. Cant seem to find anything in the help files about this. What am I messing? thanks, Michael KC4ZVAEL98
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb