A good question. Some people seem to get in effortlessly, others seldom if at all. I fall into the seldom category, though I had better luck today. Someone suggested that perhaps my dilithium crystals needed realignment, so I pulled out my calibrated deviation meter, and verified the PL is set as recommended for the FT-847 at 700 Hz. Next, I pulled out my counter with GPS time base, and measured 66.961 Hz for the tone. I am pretty certain that an accuracy of .06% should be good enough. ;)
I am wondering if it wants significantly more or less PL audio level. It shouldn't be too hard to rig up an external injection when the operation is more frequent. You have got to love satellite ops. Always something interesting to consider!
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of WCP Sent: 26 December, 2009 10:30 To: amsat-bb@amsat.org Subject: [amsat-bb] XW-1 FM
OK so what is the trick to work the FM repeater on WX-1 ? Using TS-2000 and set to :
Uplink: 145.8250 MHz FM, PL 67.0 Hz. Downlink 435.6750 MHz FM I have no problem working Linear Transponder.........................
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb