----- Original Message ----- From: "D. Craig Fox" DFox@rwglaw.com To: amsat-bb@amsat.org Sent: Wednesday, January 05, 2011 9:26 PM Subject: [amsat-bb] Ham IV rotor problem
Greetings and happy new year to my fellow sat-ops. I thought I would try
here before searching the entire ‘net, for some tips in trouble shooting a rotor problem. My up/down link sat antennas are mounted on a common boom, fixed el., above my HF yagi. I turn all of it with a very old Ham IV rotor and the original CDE controller. Here is the problem. The rotor turns fine, but there is no readout of direction. This first began to occur intermittently, then finally the needle just stopped moving while turning the antennas. I have checked the wiring at both ends and all seems in order. I am really hoping to avoid having to tear down the rotor, so any suggestions on trouble shooting from “outside the case” would be greatly appreciated.
Thanks much.
Craig N6RSX
Hi Craig, N6RSK
If the needle of the potentiometer just stopped moving while turning the antennas il means that the spring inside the motor hood is loosing contact between the needle and the motor hood so that you must tear down the rotor and open the hood to repait the spring:
73" de
i8CVS Domenico