The TNC cannot run FT8 or RTTY, those modes are sound modes and have nothing to do with packet radio (you need WSJT-X or MMTTY for those). You can do Amtor and you can connect directly to Winlink or some of the raw packet programs.
73, Bernd - KB7AK
-----Original Message----- From: AMSAT-BB amsat-bb-bounces@amsat.org On Behalf Of RG via AMSAT-BB Sent: Tuesday, November 19, 2019 7:23 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Kenwood TS-2000 built in TNC???
Hello,Just purchased a Kenwood TS2000.Can anyone tell me if the built TNC can handle digital modes like Amtor and FT-8?I read in the Manuel that it is limited on packet operation.This what the Manuel says: This transceiver has a built-in TNC which allows you to use basic (not full) packet applications.It also says this:Since the built-in TNC has been designed to work with the Packet Cluster Tune {page 53} and Sky Commander II+ {page 83} functions, some of the enhanced TNC commands may not be available. Anyway I have a Rigblaster so not s problem but if the built in TNC can handle it,would make it easier.I use FT-8,RTTY and Echolink and will use SATPC32Thanks in advance.
marzo7088@yahoo.com _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb