Ollie,
I have used Stuf since the 90's when I was doing Satellite TV installations ie. BUD dishes. It works very well. The only thing the paste is very slippery like Teflon, so once a connector is filled with Stuf and tightened, one must wipe off the excess with a towel or paper towel otherwise black tape or Coaxseal will not stick to the connector. Stuf is used to fill the air gaps in connector once mounted.
In all the years that I used it along with black tape and Coaxseal, I have never had a connector go bad on me or corrode. Keep in mind satellite signals coming down the RG6 can be in the Ghz range and also supply voltage to the LNB.
I have never tried it on ham radio antennas as I am "locationally" challenged: ie. apartment.
Hope this helps. If you have further questions feel free to write me offline.
73, Adrian AA5UK
________________________________ From: Ollie Eisman ollie@ollietech.com To: amsat-bb@amsat.org Sent: Tue, June 8, 2010 11:22:35 PM Subject: [amsat-bb] Cross Devices Stuf
Has anyone used "Stuf" from Cross Devices to waterproof RF connectors (with or without with coax seal)? It seems like a good idea but I wonder how well it works in real life.
73, Ollie AJ1O
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb