3 Feb
2020
3 Feb
'20
12:50 a.m.
After some difficulty, I was able to decode HuskySat-1 on my second attempt.
One thing I didn't mention in the video, at the end of the pass around 10 degrees elevation and lower I decoded a lot of frames because the signal was still strong and by that point the frequency wasn't changing much anymore, as the satellite's relative speed stopped changing.
Thank you again to University of Washington for launching this satellite and putting the AMSAT linear transponder on it! I wish you luck in all your missions!
Check out the UW video about their satellite: https://youtu.be/U57sES6oFgw
73, John Brier KG4AKV