Clayton
Thanks for reply.
Understood - I only did the one calibration when Funcube was launched. I am aware that the satellite drifts, but I used to start -1.5Khz below the calibration point, then move up in frequency.
My point is that I had to start the QSO +6.6Khz - seems a big difference.
Again, thanks for reply
Peter
G8KEK
From: Clayton Coleman [mailto:kayakfishtx@gmail.com] Sent: 15 March 2014 01:33 To: Peter Wilson Subject: Re: [amsat-bb] Re: AO-73 Deaf again ????
Peter,
I suggest not calibrating SatPC32 every pass of AO-73 but instead utilize the plus and minus +/- keys on your keyboard to tweak your uplink as required. AO-73 tends to move a little bit.
73 Clayton W5PFG
On Mar 14, 2014 4:45 PM, "Peter Wilson" <protest@virginmedia.com mailto:protest@virginmedia.com > wrote:
Paul,
Thank you for your reply - I think I have solved the problem
I use SatPC32 to control my rig and I have calibrated it to be fairly close for receiving my own transmission early in the pass.
HOWEVER - today, I had to tune 6.5Khz higher than I normally do to hear my own signal ! Once I found my own signal everything was back to normal
I know there are other people having the same issue, so I wonder what has happened to the satellite?
Thanks to everyone who has replied.
Peter
G8KEK
_______________________________________________ Sent via AMSAT-BB@amsat.org mailto:AMSAT-BB@amsat.org . Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb