I'm considering replacing my IC910 used for satellite work and FT736R used mostly for 2M EME with a single IC9700.  I'd appreciate hearing from folks who use the 9700 about their experiences.

It will of course have to implement a set of coax switches and relays to allow the 9700 to be connected to 5 different antennas, three amps, three preamps, etc.  But I'm mostly concerned about the cabling and interface to WSJT-X, a KPC9612, a sequencer for the EME side, etc.

Interfacing the FTdx101D to WSJT-X required simple cabling but several settings in both the radio and WSJT-X, and another set of settings in WSJT-X for using that radio with a mast preamp and sequencer for 6 meters. All that was a bit painful to figure out.

Any pitfalls with the IC9100?

Jim, WD0E