Jeff,
I don't have 9600 baud TX, but I have used the MixW virtual TNC to copy the BBS and digi with WiSP and a VU5K. Looks just like 25 years ago when I was using a hardware TNC. Should work witi the any rig if you have the right soundcard interfacing. I have already have a copy of MixW, but there is a 30 demo, last time I looked.
73s,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of jeff <griffin <Sent: Monday, September 25, 2017 09:36 AM <To: 'AMSAT' amsat-bb@amsat.org <Subject: [amsat-bb] Falconsat-3 pacsat < <I'm interested in getting back on the pacsat(s). It's been awhile, I'm <thinking about 15 years since I ran WiSP. I just installed a copy of WiSP, <but my software key is in Florida at my winter home, so I'm running the <demo. Now a few questions. < < < <1 Is anybody doing the BBS on FalconSat-3? < <2. Is so what software are you using? < <3. can someone recommend a software derived 9600 baud TNC that will talk <to <either a Flex VU5K, or an IC-9100. I would need this to work with a WiSP <like program to do the BBS thing. Thanks for helping this old guy get <restarted with pacsats. < < < <73 Jeff kb2m < < < < < <_______________________________________________ <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions <expressed <are solely those of the author, and do not reflect the official views of AMSAT- <NA. <Not an AMSAT-NA member? Join now to support the amateur satellite <program! <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb