Thanks all!
73 de W0AAE
On Fri, Apr 24, 2020 at 12:08 PM Mark D. Johns [email protected] wrote:
Yes, but I've also had experience with expensive transceivers and transverters desensing on FM and SSB when I transmit. It's a common issue, especially if the uplink is on VHF and the downlink is on UHF (3rd harmonic). -- Mark D. Johns, KØJM AMSAT Ambassador & News Service Editor Brooklyn Park, MN USA EN35hd
"Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." ---Mark Twain
On Fri, Apr 24, 2020 at 11:55 AM Ham Radio Essentials via AMSAT-BB [email protected] wrote:
Just one more question: Has anybody had any experience with a cheap SDR desensing on FM or SSB when they transmit?
On Thu, Apr 23, 2020 at 6:38 PM Ham Radio Essentials <
wrote:
Thanks everybody for the information! I am thinking of using a web SDR for the receive(may work a little), but maybe I'll just go semi-duplex
for
right now, or maybe get an SDR radio for the receive side. Thanks again!
73 de W0AAE
On Thu, Apr 23, 2020 at 6:31 PM Stefan Wagener via AMSAT-BB < [email protected]> wrote:
Here you go:
https://shop.kuhne-electronic.com/kuhne/en/shop/amateur-radio/new/Transverte...
has worked for me.
73, Stefan VE4SW
On Thu, Apr 23, 2020 at 6:04 PM Joseph B. Fitzgerald via AMSAT-BB < [email protected]> wrote:
Transverters are a very viable option for producing RF on VHF/UHF
and
up.
The trade off is usually a bit more work on integration and
operation.
For example it might take a bit of futzing to get a smallish (100mW)
signal
out of the '7300 for input to the transverter.
As far as operation, you may need to do some mental arithmetic when calculating your transmit frequency, although many radios can be
programed
such that their display does that for you.
de KM1P
From: AMSAT-BB [email protected] on behalf of Ham Radio Essentials via AMSAT-BB [email protected] Sent: Thursday, April 23, 2020 6:28 PM To: [email protected] Subject: [amsat-bb] VHF/UHF Transverter?
Hello,
I've been doing FM satellites for quite some time, and I am
wondering if
there is a cheap way to get into linear satellites. Could I use a transverter for VHF and UHF? I have an IC-7300 for HF. Could I
just
hook
that up to a transverter and it would put out RF on VHF and UHF?
73 de W0AAE _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum
available
to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official
views of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum
available
to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official
views of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb