Erich,

You are right.

The issue is that COM port of the TS-2000 can be used either for CAT or TNC but not for both at the same time. Therefore for satellite work (in my case) I use the COM port for CAT and only way is to use an external TNC.

73

Jean Marc (3B8DU)


On Dec 7, 2022, at 11:07 PM, Erich Eichmann <[email protected]> wrote:

Hi Jim,
when the 9k6 pacsats UO-22, KO-23, KO-25 were operational about 15 and more years ago my friend DL9BU (sadly deceased in the meantime) and I have been trying very hard over a long period of time to work these satellites with the built-in TNC of our TS-2000s. We didn't succeed. We've come to the conclusion that for some reason the TNC doesn't work for this. We then used the Symek TNC 2H and TNC 3S.


Am 07.12.2022 um 17:22 schrieb Jim McCullers:

Has anyone on the list used a Kenwood TS-2000 to communicate with FalconSat-3?

If so, can you pass along the menu settings that work?

 

I’m using a borrowed TS-2000 and am still in the learning phase on the menu settings.

 

The audio chain is working with local packet at 1200bps consisting of a DigiRig, using UZ7HO SoundModem and EasyTerm.

For FalconSat-3 the chain is DigiRig – UZ7HO hs-soundmodem – G0KLA PacSatGround.

Based on my  interpretation of the hs_soundmodem waterfall display I’m seeing no data from the TS-2000 when attempting FalconSat-3 communication.

 

I’m certain I have a menu configuration problem and am looking for suggestions.

 

FalconSat-3 does not have long to live, predicted to de-orbit in February and is now active for 24 hours or so on the weekends.

 

Any assistance will be appreciated.

 

Jim McCullers

WA4CWI

 

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA. 
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/[email protected]
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/[email protected]
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org