Jim,
In the past I have used MixW, which emulates a KISS TNC out a serial port, which can then be piped via real or virtual ports to the software. Worked fine at both 1200 and 9600 baud. I think there is a 15 or 30 day free trial. AGWPE has also been reported to work, though I have not tried it. Unfortunately my current wonder-rig does not currently allow 9600 baud, though they are going to have that capability Real Soon Now.
73s,
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Jim List Sent: Tuesday, February 26, 2013 11:08 AM To: 'Mark L. Hammond'; 'Bill Ress'; amsat-bb@amsat.org Subject: [amsat-bb] Re: STRaND-1 and AAUSAT3 heard in Cienfuegos, Cuba
Hi Mark,
Thanks for this. Do you have any idea if there is a suitable software based TNC??
73s Jim G3WGM
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Mark L. Hammond Sent: 26 February 2013 00:35 To: Bill Ress; amsat-bb@amsat.org Subject: [amsat-bb] Re: STRaND-1 and AAUSAT3 heard in Cienfuegos, Cuba
Hi Bill and Other Folks,
To decode STRaND-1:
1-Sprint-2 TNC at 9600 baud in KISS mode (or any 9600 in KISS mode probably)
For software, thank DK3WN of course!
2-Using this software to capture: http://www.dk3wn.info/files/online_kiss_plus.zip
3-And using this software to decode the captured KISS files: http://www.dk3wn.info/files/kissdump.zip
73,
Mark N8MH
At 04:22 PM 2/25/2013 -0800, Bill Ress wrote:
Hi Mark,
What are you using to copy/decode the telemetry?
Regards...Bill - N6GHz
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org]
On
Behalf Of Mark L. Hammond Sent: Monday, February 25, 2013 3:36 PM To: Hector, CO6CBF; amsat-bb@amsat.org Subject: [amsat-bb] Re: STRaND-1 and AAUSAT3 heard in Cienfuegos, Cuba
Congrats, Hector.
I printed several STRaND-1 packets and need to figure out what to do with them ;)
Which TLEs did you use? Based on timestamps and scrolling time back
in
SatPC32, it looks to me like the bird might be behind the pre-launch keps I'm using. Meaning, I see packets time stamped at the predicted LOS. I was NOT in the shack, but that's my guess based on time
stamps.
73,
Mark N8MH
At 06:04 PM 2/25/2013 -0500, Hector, CO6CBF wrote:
Hello All
On the 22:36 UTC pass both STRaND-1 and AAUSAT3 have been heard in Cienfuegos city (EL92sd). I was running a FUNcube Dongle with SDR-Radio V1.5 and a homebrew ARROW antenna with a homebrew preamplifier. The STRaND-1 beacon has a great signal (S9+).
Congratulations to the STRaND-1 and AAUSAT3 teams for the great job!
73!
Hector, CO6CBF EL92sd
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the
author.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the
author.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb