Hoping to get some real world advice from those that are using MacDoppler and a compatible Rotor /Controller set up as this will be my first time getting a rotator and controller.
I wanted to solicit some advice on two fronts, the rotor controller basically for ease of use with MacDoppler and rotor reliability.
My first thoughts were towards a Yaesu 5500 and maybe the PrimeTec controller or maybe the LVB tracker as it's less costly.
I read a few reviews but not much was out there in general but especially on the PrimeTec...
What are you using as a controller? would appreciate any comparisons pro's cons tips tricks you might have
My biggest concern really is the Rotator. I am in a situation such that after installation, getting back to the roof for repairs would be rather difficult. So i am trying to identify the 'best' small/moderate sized rotator (az/el) as possible /practical.
Will be turning a small M2 2m and 440 circular pol beam
Not really sure how reliable the 5500 is for long term use. so if there was a 'better' more reliable and or longer lasting rotor out there i'd strongly consider it
The only thing I thought of as a alternative was the AlphaSpid but comparing reviews I seem to come out about the same between it and the 5500
Since this is all new stuff and I am not finding the usual quality 'google' results /reviews I would greatly appreciate any help or experience /advice on this from someone that went down this road already and willing to share some first hand info.
thanks very much grateful for any advice.
Going to Dayton '10 It will get better with more support!
Myles D Landstein N2EHG [email protected]