The correct answer would have been to set up your VUCC rules (on the LOTW site) to support both the 4 digit and your 6 digit, and any other 4 or 6 digit grids in your VUCC that you operate from.   Some of the advice in the thread above is completely wrong.

On Tue, Sep 6, 2022 at 4:18 PM Mike Swiatkowski <mjswiatk@gmail.com> wrote:
It's working as expected now and it WAS the 6 character grid square issue.  I changed it in TQSL from EN52wc to EN52 and all is well.  Thanks!  Time to chase more grids!

Mike, AA9VI

On Tue, Sep 6, 2022 at 1:30 PM Mike Swiatkowski <mjswiatk@gmail.com> wrote:
I bet this grid square format is the issue.  I upload from DXKeeper-> ClubLog  -> LOTW.  I changed the grid to 4 characters in ClubLog but I bet the ARRL certificate has 6 characters and that is what is screwing this all up.  I'll try and make the changes in TQSL and then upload the ADI directly to LOTW and see if that fixes it.   Jeesh... You'd think the ARRL would have software to omit the last 2 (unnecessary) letters of the grid automatically, or at least not allow a 6 letter grid designation to avoid issues like this.  Funny though.... The 6m contacts appear just fine.  It's just the satellite ones that are not showing under the awards.  I didn't even get error messages in the upload, which would have helped track the root cause.

Thanks for the feedback.
Mike, AA9VI

On Tue, Sep 6, 2022 at 12:34 PM Barry Pfeil <barrypfeil@gmail.com> wrote:
Fought this problem a little here also.  One thing I noticed is that you must be consistent in using 4-character vs. 6-character grid square for your station location.  Have fun!
Barry K6RM

On Tue, Sep 6, 2022 at 12:55 PM Jim, ND9M / VQ9JC via AMSAT-BB <amsat-bb@amsat.org> wrote:
Hi Mike,

As was suggested earlier, the Propagation field needs to show SAT and the satellite name must be something that LOTW recognizes, e.g. RS-44 vice RS44, ARISS and not ISS, etc.

If those two ideas don't do it, how about doing a copy and paste of one of your QSOs in ADIF format and post it. (Change the callsign to protect the guilty, etc.) I'd bet that would reveal what needs to be fixed.

73,

Jim, ND9M

-----Original Message-----
From: Mike Swiatkowski <mjswiatk@gmail.com>
To: amsat-bb@amsat.org
Sent: Tue, Sep 6, 2022 3:28 pm
Subject: [AMSAT-BB] LOTW VUCC Satellite entries

I'm having trouble getting my satellite log to show up in the LOTW VUCC Satellite section.  I have over a hundred grids and not one shows up confirmed in LOTW.  I looked at the .adi log in TSQL and indeed the mode of satellite, satellite name, and bands are populated.  Does anyone have an idea why nothing would show up in VUCC Satellite?  I only see my 6m contacts.   I even tried to set a filter as my grid square from the example online (https://lotw.arrl.org/lotw-help/vucc-setup/?lang=en).  That didn't help.  Your assistance is appreciated.  

Thanks,
Mike, AA9VI

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org