Hi Gene,
Assign the IC-910 as a receiver using the rx command (instead of as a xcvr) in the satellite configuration record in the itune.cfg file.
Something like this:
satellite AO-51 V/S ; mode V/S downlink 2401.200 fm uplink 145.920 fm rxconverter 2256 ; for 145 MHz (tweek as needed) rx ic910 1 60 ; on com 1, hex address 60 tx Radio2 etc ; fill in whatever the other radio is
This will use only the IC-910 receiver on just 2 meters. The other radio will be used only on 145 MHz as a transmitter. You can share the same com port if they are both ICOM radios.
Operation with separate RX and TX is in the documentation on page 13 "Configuring Radios". (itune110.doc)
73, Tony AA2TX
---
At 12:30 AM 8/20/2009, WB2LLP wrote:
I have been trying to get Instant Track 150 to control my IC910 when tracking AO-51 VS. Since my down converter translates to 145 Mhz, I assign the down path to the 2 meter side of the 910. I then create a factious path for the 432 side. When I enter the R command, IT starts displaying both the 144 and 432 sides but in alternating places.
Is it possible to tell Instant Track to concentrate solely on the 144 path and ignore the 432 path? I have not found a way to do this and a search of the documentation does not find a solution. What I was trying to do was let Instant track handle the 2401 Doppler shift and I would handle a separate radio for the 144 uplink.
Can I do what I want to do with IT or is it time to say goodbye to a friend and move up.
TNX es 73 de WB2LLP Gene _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb