Alan,
A few days ago the satellite switched from DUV to HS shortly before my LOS. The program was set to "auto" and I was able to decode and uploaded my first six frames of HS data. Using V:1.03-h, the s/w worked as expected..
Bob Vislay KO6TZ
Hi Ed,
That is what HS looks like. There have been 2-3 other periods of HS telemetry over the past few days. In the ones I saw or heard, my software did not automatically switch, and when manually switched copied nothing. There are known issues with HS in my station which I am working on, so that is not entirely unexpected. I was able to copy a few blocks on a much earlier test. From other comments, you do need a stronger signal than DUV, and depending on your equipment, a higher sampling rate.
73s,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Ed K9EK <Sent: Friday, March 25, 2016 9:59 AM <To: AMSAT-BB <amsat-bb at amsat.org> <Subject: [amsat-bb] Fox high speed? < <About mid-pass on the ~9:42AM pass this morning, FOX appeared to switch from the DUV mode to <what I believe was high speed. The screen pattern changed from the usual 2 parallel line pattern (good <eye pattern and decoding) to a multi-parallel-line pattern with brief stops. My tlm program 1.03f was <set on auto. Nothing decoded; no eye pattern. I manually switched to high speed; same results. What <did I do wrong? < <Thanks, <Ed K9EK <EL98