Some have modified the rig. See, for example, https://dc1rjj.darc.de/IC-9100_PTT-CW_via_USB_modification.pdf Another solution is a little Windows utility program by ND0B called ICOMkeyer.exe -- Mark D. Johns KØJM / MØGZO / ex-9H3DJ / ex-KØMDJ Brooklyn Park, MN USA EN35hd ----------------------------------------------- "Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." ---Mark Twain
On Thu, Mar 14, 2019 at 3:31 PM kb2mjeff@att.net kb2m@arrl.net wrote:
Moving off my 30 year old TNC due to poor data performance. The old
DSP2232 has done it's job. I'm now in the middle of setting up a software based modem system using my IC-9100, EasyTerm, and HS_SoundModem. The data D/L performance really blows away the hardware based modem. This somewhat surprises me as 20 years ago, we as a group did simultaneous d/l tests using S/W and H/W modems, and at the time the hardware was far superior. The S/W modems and CPU's driving them have come a long way.
Anyway what my problem is, how to activate PTT with this setup. I had
this working a few years ago, but forgot what I did. Where I'm at now, I'm using vspMgr to try and split the IC-9100's PTT serial port, but no joy. Do I need to split the port? Or use VOX? Any one get this working? Thanks...
73 Jeff kb2m
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb