After you try all of the suggestions, go to fundamentals using a ruler.
I bought an ARROW 146437-10WBP in 2011, never used it until 2012, when I found a serious VSWR workmanship flaw in the 2011 ARROW products.
2m VSWR sucked and I could not adjust it in no matter what I did. See my files in: https://groups.yahoo.com/neo/groups/HAM-SATs/files/Antenna%20-%20Commercial/...
What I discovered is the 2m Driver gamma-match wire was 1.00" too short (per ARROW actual documentation). Upon verifying this with ARROW they sent me a new 2m driver element since we cannot unpress the pressed in BNC connector to change the wire.
My advice it to measure ALL per ARROW documentation especially the gamma-match wires - who knows maybe ARROW messed up, again!
Also the ARROW Diplexer is max 10W, be carefull not to go much higher in FM!
********************************Message: 6 Date: Fri, 31 Mar 2017 20:45:36 -0400 From: John Brier johnbrier@gmail.com To: Ken Alexander k.alexander@rogers.com Cc: AMSAT BB amsat-bb@amsat.org Subject: Re: [amsat-bb] Problems with my Arrow******************************** Best regards, Dale Kubichek, MS-EET, N6JSX Master Mason, 32°, Shriner NRA Life/Cert Instr, USN Vietnam Vet Sidney, OH 45365 EN70vh 937-726-6677
http://groups.yahoo.com/group/HAM-SATs http://groups.yahoo.com/group/RDF-USA