Steve
I have measured 1.0 across both VHF and UHF with mine. There was one case where it was high and it was due to a bad coax cable. Make sure you test coax and connectors first using an analyzer and a 50 ohm dummy load. Then from there you can measure the antenna and tune.
On Fri, May 21, 2021 at 2:58 PM Steve Kristoff skristof@etczone.com wrote:
Folks using a handheld and an Arrow antenna to work the FM satellites: What SWR do you have with that combination? I'm checking to see if everything is working right on my set-up. You may reply off-list if you like. Thanks!
Steve AI9IN Oldenburg IN Grid EM79ji
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org