![](https://secure.gravatar.com/avatar/1a570874e9b27f5b29c2ed86a03d029d.jpg?s=120&d=mm&r=g)
Hi Jerry I was running HDSDR with 12kHz bandwidth. The BW appeared to cover all of the parallel signal tracks. I will try FCD P+ by itself; I know that worked last time (months ago) I tried it. Thanks! Ed K9EK
----- Original Message -----
From: "Jerry Buxton" [email protected] To: "AMSAT-BB" [email protected] Sent: Friday, March 25, 2016 3:38:44 PM Subject: Re: [amsat-bb] Fox high speed?
Ed,
Not sure what your setup is, but be sure your bandwidth is 11-12k for High Speed. If you run the FCDP+ direct from FoxTelem then that is taken care of, if you use SDR# or HDSDR or other software then you may have it set (or it may default) to a narrower filter in NFM mode.
Jerry Buxton, NØJY
On 3/25/2016 13:53, Ed Krome wrote:
Hi Alan Thanks for the note. I, too, have successfully received high speed telemetry in the past, although it has been a while. Wonder what changed. Maybe Drew can point us in the right direction. 73, Ed Krome K9EK Sent from my iPhone
On Mar 25, 2016, at 11:23 AM, Alan [email protected] wrote:
Hi Ed,
That is what HS looks like. There have been 2-3 other periods of HS telemetry over the past few days. In the ones I saw or heard, my software did not automatically switch, and when manually switched copied nothing. There are known issues with HS in my station which I am working on, so that is not entirely unexpected. I was able to copy a few blocks on a much earlier test. From other comments, you do need a stronger signal than DUV, and depending on your equipment, a higher sampling rate.
73s,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:[email protected]] On Behalf Of Ed K9EK <Sent: Friday, March 25, 2016 9:59 AM <To: AMSAT-BB [email protected] <Subject: [amsat-bb] Fox high speed? < <About mid-pass on the ~9:42AM pass this morning, FOX appeared to switch from the DUV mode to <what I believe was high speed. The screen pattern changed from the usual 2 parallel line pattern (good <eye pattern and decoding) to a multi-parallel-line pattern with brief stops. My tlm program 1.03f was <set on auto. Nothing decoded; no eye pattern. I manually switched to high speed; same results. What <did I do wrong? < <Thanks, <Ed K9EK <EL98 <_______________________________________________ <Sent via [email protected]. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions expressed <are solely those of the author, and do not reflect the official views of AMSAT-NA. <Not an AMSAT-NA member? Join now to support the amateur satellite program! <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb