Gpredict is very easy to install on a Raspberry Pi. I did so on the "Buster" version of Raspbian. There is a .deb file to download and it just installs and runs. Disclaimer: I have not tried to use it more than just to see that it started up ok and displayed satellites.
73,
Burns WB1FJ
On Thu, Feb 13, 2020 at 7:49 PM Joseph Armbruster via AMSAT-BB < amsat-bb@amsat.org> wrote:
James,
Look into up-board.org, should suite you better than a RPi. It's not cheap but it's not expensive either, considering what you're getting for the size...
73's, Joseph Armbruster
On Thu, Feb 13, 2020 at 7:12 PM Hans BX2ABT via AMSAT-BB < amsat-bb@amsat.org> wrote:
You could install Ubuntu instead of Raspian, I guess. Gpredict is in the repositories.
At any rate: GIYF.
Hans
BX2ABT
P.S. I always think it is funny that people want something cheap, small and lean like an RPi and still expect something like the whole clunky Windows system with its software to work on it. The RPi was designed with the maker/educator in mind and that almost automatically means using a Linux based distro.
So please, if you want to start tinkering with RPis or other single board computers (SBCs) then start changing your thinking and that means no more Windows. If you don't want to change, then don't consider low cost SBCs an option.
On 2/14/20 2:52 AM, Paul Stoetzer via AMSAT-BB wrote:
I answered you when you asked this on January 29th, but will provide
more
detail as to why this isn't possible without quite a bit of effort.
The Raspberry Pi uses an ARM-based processor, generally running some distribution of Linux. SatPC32 is written for computers using x86-based processors running Windows. There is a possibility you could get it running, slowly, with a lot of effort through use of x86 emulation and
the
Wine compatibility layer, but it would require quite a bit of rather advanced work.
Gpredict is the software you want to use for satellite tracking and it works great on the Raspberry Pi. Unfortunately it's not in the Raspbian repository, so it does require some work to get it installed. Without knowing what operating system or what version of the Raspberry Pi you
are
using, I can't direct you to the proper guide.
73,
Paul, N8HM
On Thu, Feb 13, 2020 at 1:37 PM James Brown via AMSAT-BB <
amsat-bb@amsat.org>
wrote:
Is anyone running sat 32 on a raspberry computer? If so how would I
set
it up? Jim KI6WJ _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views
of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb