Alan, Windows 10 pro Version 10.0.17763 Build 17763 Java jre1.8.0_221
wonder what other variables might be a factor?
73 Kevin wa7fwf
On 10/31/2019 03:33, Alan via AMSAT-BB wrote:
Kevin,
I just played your recording through 1.08p. Recovered 25 frames, which is about what you expect. More evidence there is another variable involved.
73,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Kevin <via AMSAT-BB <Sent: Wednesday, October 30, 2019 22:45 PM <To: amsat-bb@amsat.org <Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p < <Chris, < The 9700 outputs a 12khz IF signal that is passed to the internal <codec and then out the USB port and windows treats it as a soundcard. < I used audacity to create about a 2min file and then read it in on <1.07y to verify it is good. < I uploaded it to dropbox and the link is < https://www.dropbox.com/s/eh5bya72y8gfskt/fox1.wav?dl=0 < <it was recorded at 48000 and has been saved as a wav < <Thanks <Kevin wa7fwf < <On 10/30/2019 13:59, Chris Thompson via AMSAT-BB wrote: <> I have tried to reproduce this, but I do not have a 9700 so it is hard. So <> far I can not work out what is wrong. <> <> Can someone describe the setup with the 9700? How is the audio read into <> the computer and sent to FoxTelem? Is FoxTelem reading it from a sound <> card? Or what looks like a sound card? <> <> Can someone use Audacity and record some audio for me to test with? Try <to <> record it at the sample rate you use in FoxTelem. e.g. if you set FoxTelem <> to IQ and 48000 samples per second, then set Audacity to 48000 too. <> <> thanks <> Chris <> <> On Wed, Oct 30, 2019 at 1:23 PM jeff griffin via AMSAT-BB < <> amsat-bb@amsat.org> wrote: <> <>> I'm going to wait for the fix for the 9700. In the meantime I'm now <>> collecting telemetry with my FIAB with a eggbeater antenna setup that I'm <>> going to leave up here for the winter. I'm seeing a much better decode <rate <>> with 1.08p over 1.07y, about 2 to 1. So I'm seeing 1.08 is clearly better <>> then 1.07. Thanks Chris! <>> <>> 73 Jeff kb2m <>> <>> -----Original Message----- <>> From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of <Kevin via <>> AMSAT-BB <>> Sent: Wednesday, October 30, 2019 12:54 PM <>> To: amsat-bb@amsat.org <>> Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p <>> <>> Hi Alan and everyone else that replied, <>> <>> Windows Sinc also has zero decodes, tried all decoder modes. <>> <>> for now 1.07y FTW <>> <>> Thanks <>> Kevin <>> <>> <>> On 10/29/2019 23:20, Alan wrote: <>>> I you are using the Raised Cosine decoder, try the Windows Sinc instead. <>>> <>>> 73, <>>> <>>> Alan <>>> <>>> WA4SCA <>>> <>>> *From: *Kevin via AMSAT-BB mailto:amsat-bb@amsat.org <>>> *Sent: *Wednesday, October 30, 2019 12:21 AM <>>> *To: *amsat-bb@amsat.org mailto:amsat-bb@amsat.org <>>> *Subject: *[amsat-bb] IC-9700 & foxtelem 1.08p <>>> <>>> Hi All, <>>> <>>> Any IC-9700 users out there that have switched to foxtelem 1.08p <>>> <>>> using USB and IQ mode? I see a good eye but get zero decodes, dropping <>>> <>>> back to 1.07y and it all starts working again. <>>> <>>> 73 <>>> <>>> Kevin WA7FWF <>>> <>>> _______________________________________________ <>>> <>>> Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum <available <>>> <>>> to all interested persons worldwide without requiring membership. <>>> Opinions expressed <>>> <>>> are solely those of the author, and do not reflect the official views <>>> of AMSAT-NA. <>>> <>>> Not an AMSAT-NA member? Join now to support the amateur satellite <>> program! <>>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb <>>> <>> _______________________________________________ <>> Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum <available <>> to all interested persons worldwide without requiring membership. <Opinions <>> expressed <>> are solely those of the author, and do not reflect the official views of <>> AMSAT-NA. <>> Not an AMSAT-NA member? Join now to support the amateur satellite <program! <>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb <>> <>> _______________________________________________ <>> Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum <available <>> to all interested persons worldwide without requiring membership. <Opinions <>> expressed <>> are solely those of the author, and do not reflect the official views of <>> AMSAT-NA. <>> Not an AMSAT-NA member? Join now to support the amateur satellite <program! <>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb <>> <> < <_______________________________________________ <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions <expressed <are solely those of the author, and do not reflect the official views of AMSAT- <NA. <Not an AMSAT-NA member? Join now to support the amateur satellite <program! <Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb