Falconsat3 brings back a great satellite capability for emergency response traffic into and out of remote disaster areas.
Its file store and forward BBS using the PACSAT protocol is ideal for getting multiline messages, and pictures and data out of an area. Amateur radio Sateliltes sort of abandoned this concept with the rise of the internet. And then the short, real-time contact capability of APRS better matched the shorter attention span of the evolving users.
But now we have both in Falconsat3. But we also now have the Internet and can integrate a worldwide collection of satstations capturing all the downlink PACSAT BBS packets and building a WEB portal on the ground that always mirrors the traffic on the bird. Imagine that a remote operator can post a photo or file that can be read on a Falconsat WEB portal by FEMA or emergency operators back here anytime, anywhere.
The concept is suggested on this page: http://aprs.org/PFS3.html
All we need is someone to write the internet server that collects the BBS packets from all the ground stations like the APRS-IS already does for APRS, but this new PACSAT-IS would be just for PACSAT BBS traffic.
Then someone to collect the data and write the WEB Portal.
Then people to put up satgates (hopefully using omni antennas) and with enough stations, all packets could be collected.
Anyway, I created the above web page to kind of serve as a target for this exciting new Amateur Radio capability.
So even stations that are using OMNI antennas now and only decoding a few packets per pass, we need to understand how well this works for high elevation passes. Even this sparse data is good data.
Remember, with a standard TNC all you are seeing are the few UI packets in the downlink. I think if you set KISS mode, you will be flooded with all the streaming BBS data too. This continuous stream at 9600 can make it easy to see the effect of an antenna in very short time.
Bob, WB4APR