I did so years ago. Just toggle switches. I had indicator LEDs on the box that I mounted the switches in. As I recall, I used DPDT switches with one pole supplying power to the relay on the antenna, and the other pole to turn on the indicator LEDs. This was for the KLM antennas, rather than the M2, but I assume something similar.
73 ----- Jim Walls - K6CCC jim@k6ccc.org
-----Original Message----- From: "BeetleJerald Oliver" revjwo@att.net Sent: Friday, April 9, 2021 11:17 To: "AMSAT BB" amsat-bb@amsat.org Subject: [AMSAT-BB] DC Switch for M2 Polarization Antenna Switch
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.orgJust wondering if anyone has ever devised a 12 Volt DC Switch console at the operating position to send 12V to the Polarization switches on the CP yagis at the tower? would toggle switches be okay for that or should I use relays instead? Also like to use LED indicators for visual settings...... Any thoughts ? 73 Jerry KJ4EU