Hello David!
From time to time with the FCDPP I find this helpful to do if something is going "wrong":
exit FoxTLM unplug/plug in FCDPP followed by launching FCHID2.002.exe then resetting to default values, then setting the frequency to the "center" frequency I want to use with FoxTLM followed by launching FoxTLM
That fixes about anything "weird" I've seen! Give that a go.
Mark N8MH
At 06:53 PM 1/10/2018 -0500, David G0MRF via AMSAT-BB wrote:
Hi all.
I've returned from a break over Christmas and noticed the signal level on my fox-tlm screen has dropped. I've also noticed that the various parameters for the dongle include LNA and Mixer gain along with IF bandwidth of 200kHz However, there is also a box that says RF filter and that is set to 0-4MHz.
I can't see anyway to change the RF filter setting ! I assume this should be 2m to select the internal SAW filter. Any idea where I can start looking?
Many thanks
David G0MRF _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb