Hi, Just to be clear here, your G-5500 or G-5400 control box says 180 elevation but your GS-232 interface connected to satpc32 says 90? have you tried using a terminal program like "putty" or hyperterm to talk directly to the GS-232 and issued the B command to see that elevation really is being reported as 180 by the GS-232, depending on the results you would at least know if it is a rotor/interface issue or a satpc32 issue.
73 Kevin WA7FWF
On 10/12/2017 10:24 AM, Iapicco, Christopher wrote:
Hello,
I am attempting to use SatPC32 12.8c on Windows 7 to control a Yaesu GS-232 rotor to track my university's cubesat. All connections have been doubled checked for accuracy. In the setup, the 180 degrees max elevation is selected, along with the correct setup for the com port, and the rotor interface is set to Yaesu GS232.
For some reason, the software is only registering that the rotor has 90 degrees of elevation still. Meaning that when the rotor controller reads 180 degrees, the software reads 90 degrees. Similarly, when the controller reads 45 degrees, the software reads 90. It seems that all built in software settings have been explored and a solution for this problem cannot be found. Any suggestions?
Thanks _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb