Howard, I tested that with the FT-817 as "Radio 1" and the FT-847 as "Radio 2" (I don't have an FT-897). My settings in menu "Radio Setup": Radio 1: FT-817 Cat baud rate: 38400 COM port x CAT delay: 20 Radio 2: FT-847 CAT baud rate 57400 COM port y
Option "Autom. Rx/Tx change" checked, all other options in the menu unchecked. That worked flawlessly, also with HO-68.
The same test with the FT-847 as "Radio 1" and the FT-817 as "Radio 2" worked also flawlessly.
In menu "Options" I have set the SGP4SDP4 model. The SGP8SDP8 model causes a math error with HO-68 ("Ungultige Gleitkommaoperation" = "Invalid Floating Point Error"). The reason: In the Keplerian data sets for HO-68 the value of the element "bstar drag term" (line #1, col. 54 - 60) is 0. I have fixed that and there is a patch file on my website, Engl. page "Downloads" , "Patches".
73s, Erich, DK1TB
----- Original Message ----- From: "Howard Kowall" hkowall@shaw.ca To: "amsat-bb@AMSAT.Org" amsat-bb@amsat.org Sent: Tuesday, January 12, 2010 12:44 AM Subject: [amsat-bb] FT817 and SatPc32
Hello to all I am running SatPc32 ver 12.8a and a FT817ND(vhf) and a FT897D(uhf) It all works fine until I go to Sat HO-68,every time I go to that ast it shuts off my FT817nd Has anyone else had this problem Its almost like it is getting the cat command to shut off Below is my doppler settings from the sqf file that iI have put in.
HO-68,435765,145925,USB,LSB,REV,0,0,Xponder HO-68,435675,145825,FM,FM,NOR,0,0,Rptr HO-68,435790,145910,USB,LSB.REV,0,0,CWbcn
Thanx to all Howard VE4ISP _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb