Thank you all for the suggestions. I'll check all your indicated solutions. If will be possible I'm going to choose the TV rotors solution...in my opinion is more inexpensive!
Thank you for now!
Best 73s
Marco IZ5IOW
2011/1/18 Mike Ryan [email protected]
I agree on TV rotors. Its an excellent inexpensive way to get elevation. The U100/110 is what I use as well and its well suited because you can put the boom right through the rotor.
There are some nice pictures of setups using these rotors on this sites: http://www.rotorservice.com/press3-alliance.htm <- my setup imitates this one ... http://home.wavecable.com/~ko6th/ http://home.wavecable.com/%7Eko6th/ http://users.wbsnet.org/n0yk/cushcraft.htm And there’s a QST article on this in the Dec 1998 issue You can even build a controller for computer control but I’m currently rotating elevation and azimuth manually.
Mike WB1AAT
Message: 7 Date: Mon, 17 Jan 2011 16:52:35 -0800 From: "Greg D." [email protected] Subject: [amsat-bb] Re: Elevation System To: [email protected], [email protected] Message-ID: [email protected] Content-Type: text/plain; charset="iso-8859-1"
Hi Marco,
If you are looking to lash something together (instead of going with a purpose-built Elevation rotor), I and others have had success with Television-type rotors that have a through-hole for the mast. Mounted on their side, they seem to perform very well. Just keep things balanced, and protected from the weather and they should be happy.
See: http://home.wavecable.com/~ko6th/http://home.wavecable.com/%7Eko6th/
I used an Alliance U-110. It has performed flawlessly for about 10 years now.
Good luck,
Greg KO6TH
Date: Mon, 17 Jan 2011 12:59:23 +0100 From: [email protected] To: [email protected] Subject: [amsat-bb] Elevation System
Hello,
I'm Marco, IZ5IOW. I'm searching a good and cheap solution to build an * elevation* system to set up an home satellite station. More specifically
I'm
looking suggestions for the mechanical part... The loading of the antenna
is
the follow: 15El UHF Yagi and 9 El VHF Yagi. The mechanical part should
not
bear too much weight!
Can anyone help me?
Thank you all. Best 73s.
Marco _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb