I'm a little confused trying to get the setup working with the 9100. I can key the 2232 into PTT, but not the 9100. I'm using a cable that I built 15 years ago to work with my 847 and 910. looking at the 9100 manual it sez I can use the ACC port OR the DATA2 port. I'm thinking now with the 9100 I might have to use the ACC connection on the 9100? Is anybody successfully working 1200 or 9600 packet with a TNC and the 9100, with either the DATA2 or ACC port?
73 Jeff kb2m
I'm using a 9100 with a PacComm Sprint-2. The cable setup is different than the 910...it's one jack on the rig rather than two.
73, Drew KO4MA
On Nov 3, 2017, at 8:07 PM, kb2mjeff@att.net kb2mjeff@att.net wrote:
I had some time today to start working on my Pacsat station. Is anyone else trying to setup a 9100, WiSP, DSP2232, and SatPC32 ? I got the setup to rx 1200 baud APRS packets, but can’t rx 9600 baud from Falconsat-3. I’m using an old cable I used to use with a 910, and an FT-847. I have 9600 baud turned on. Anyone else get this to work?
73 Jeff kb2m
--- This email has been checked for viruses by AVG. http://www.avg.com