That would make logging much easier!
73, Don KB2YSI
On Fri, May 18, 2018, 08:48 John Brier johnbrier@gmail.com wrote:
I haven't done this yet but I think others have and I plan to do it one day: most recorders are stereo. Get a *channel* splitter (I bought one on Amazon) and send radio audio to left channel, say, and an external mic to right.
For me I plug my headphones into the recorder to monitor the radio so I would have to splice the left channel to both right and left so I didn't have my external mic audio in one ear and the radio in the other.
One reason I want to do this is because it will make transcribing QSOs from the recording easier. Just open the waveform in Audacity or another similar app and you can see anytime you talk on the local mic. Skip there and transcribe the contact. Otherwise for me at least I end up having to listen through a lot/most of the recording trying to find myself.
73, John Brier KG4AKV
On Fri, May 18, 2018, 08:13 Don KB2YSI kb2ysi@gmail.com wrote:
I would think there is a dual input recorder available, one for the RX one for the mic, or use 2 recorders and splice the audio later.
73, Don KB2YSI
On Fri, May 18, 2018, 04:25 Ken M va7kbm@outlook.com wrote:
Hi Patrick,
Of course you are right about full duplex recording (kicking myself for not thinking of that!).
For HF and all other half-duplex work, especially QRP from the field I’m looking for a wired solution so I don’t record background noise (and I
use
a headset). Anyway, that’s not a satellite application so I’ll take the question elsewhere.
Thanks! 73 Ken VA7KBM
On May 17, 2018, at 5:21 PM, Patrick STODDARD (WD9EWK/VA7EWK) < amsat-bb@wd9ewk.netmailto:amsat-bb@wd9ewk.net> wrote:
Ken,
It really is simple, if you are working full-duplex. Just record the RX audio. You get the full exchanges, since you will hear yourself and the other stations. A splitter on the speaker of the radio receiving the downlink can feed audio to a recorder and headphones/earphone/earbuds you are using to hear the downlink.
For working HF or working satellites half-duplex, I just use a recorder that picks up the radio's speaker audio and my voice with its microphone. Then I get both sides of those QSOs.
73!
Patrick WD9EWK/VA7EWK http://www.wd9ewk.net/ Twitter: @WD9EWK or http://twitter.com/WD9EWK
On Thursday, May 17, 2018, Ken M <va7kbm@outlook.commailto: va7kbm@outlook.com> wrote: Hello AMSATers,
I'm looking to record both TX and RX audio to a digital recorder, either at the QTH or in the field (but mainly in the field), in either of two common scenarios:
- TX from one radio, and RX from a different radio (as in satellite use
with one radio for uplink and one for downlink).
- TX/RX from the same radio (as in a full-duplex radio for FM
satellites, or for non-satellite use).
I'm wondering if you know of a device (or a published circuit design) that will allow TX/RX recording while isolating the radios from each other and/or a radio's TX from it's RX, while linked to the same recorder? I have to believe this is a well-solved problem within the satellite radio community but I haven't found too many ideas for field use. This is seems to be an easier problem to solve at the QTH if recording to computer, with various sound interfaces (Signalink, etc.) so my main interest is in field use with a digital recorder so I can record my QSO's while juggling two radios plus antenna, etc. The easy alternative is just to record the RX side, which is easy, and works for logging but doesn't give you the full exchange.
Thanks & 73! Ken VA7KBM
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb