I have the same problem. It is registry related since there is multiple locations in the Windows 10 registry it tries to store the data. I find that If I enter just one satellite (I usually use AO-07), then exit and restart GSC, all of the satellites are back (until maybe the next reboot). If there is a software update to Windows 10 it almost always needs to be done again as I did above.
I don't think WISP32 is supported any longer so not sure this problem will get fixed.
Reid, W4UPD
On 6/3/2018 12:31 PM, Vincenzo Mone wrote:
Hello,
I am trying to set the Wisp on Windows 10 but having problems
to get the settings permanent.
If I go into Tracking and select the satellites I want to have under eyes,
When I close the GSC and shut down the PC on the next
Start-up of the PC and the Wisp program, I get the lower part of the GSC program
Empty. I have to go again in the tracking tab and select again the satellites but
At the next shut down and restart I am again at the beginning point.
What to do to get them permanent?
Thanks
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb