On Sat, Apr 14, 2018 at 12:43 PM, Vince Fiscus, KB7ADL vlfiscus@mcn.net wrote:
At 12:29 PM 4/14/2018 +0000, Paul Stoetzer n8hm@arrl.netwrote:
The general guidance in the early years of operating linear transponders was to adjust your transmitter to maintain a constant receive frequency. Experience with the Mode J transponder on FO-12 caused the gudiance to be updated to tuning the higher of the two frequencies. See the Sept 14, 1987 Amateur Satellite Report for more details ( http://www.ka9q.net/asr-1987.pdf).
I've always tended to adjust the uplink to the satellite, even on mode J. Never been chewed out for doing it that way though.
My question, for OM's doing computer control of their rigs. Is the software following the rule, or is it adjusting both uplink and downlink simultaneously?
You say "Is it following the rule?". As Paul said, the original "one true rule" of adjusting only Rx changed to adjusting the highest frequency frequency, but now (see Gould Smith's book, Appendix A) adjusting both is common if you have computer aided tuning. Both MacDoppler and SatPC32 can adjust both in this way (although MacDoppler can certainly be set to only change one frequency). I don't think that is in opposition to any rule. It is just an update of "The One True Rule".
I've always been curious about that.
Still using InstantTrack here. :-)
KB7ADL
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb