Hi Mike Practice on Earth before you try for space. On the Marex web page there are many tips on how to configure your TNC. Try Unproto on a Local System and get the hang of Unproto.
Aprs uses Unproto mode. Learn how to send and recieve text via Unproto mode locally and then change a call sign and you can try a local APRS netwsork.
Once you have mastered Earth Unproto/Aprs they you can try ISS.
good luck
http://www.marexmg.org/fileshtml/howtouseiss.html
--- Michael Tondee mat_62@netcommander.com wrote:
Since for the moment I am down to just a two meter mobile for ham equipment, I have been trying to get a setup going for packet and APRS. At the moment I have only been experimenting with the receive side of things but I'm not having much luck. I'm using a 4 element beam with Az/El tracking that I used to use when working the LEO's along with SatPC32 for rotor control. I'm setup with AGWPE and UIview32 using a soundcard. I've tried several passes tuned to 145.825 and so far on just one I was able to get one small packet to decode on the UIView32 terminal screen. I'm not seeing any APRS stations appear on the map and on the last three good passes I've tried I've heard little if any packet activity at all. What am I doing wrong here? Is it possible there is no activity on some of the passes? Even when I've heard packets I've only successfully decoded one. Tnx for any advice or pointers someone could give, 73, Michael, W4HIJ AMSAT # 36017
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ