8 Feb
2019
8 Feb
'19
7:29 p.m.
For MMSSTV just set it to Auto and the software will pick pd120 once it picks up the signal. It's not one of the visible buttons, but the mode is in there and the software will decode it.
(Can't help you with the sat32 question. Sorry!)
Steve AI9IN
On 2019-02-08 13:25, James Brown wrote:
Downloaded MMSTV to prepare for iss . I do not see pd 120 listed as a mode. Is the the correct software to use?
My set up is satpc32 controlling ft817 and ic7100 for No. 2 radio and g5500 rotor.
will I be able to run sat32 for tracking and also sstv for the picture? I presume yes.
Jim KI6WJ _______________________________________________