Hi Bill, I am using the LVB tracker with the G-5500 and controlling them with the SatPC-32 software. My experience with this system has been very pleasing, straight forward and plug & play. The documentation for the LVB is excellent and the same is true for SatPC-32. Setting the calibration between the LVB and the G-5500 was a snap, with very easy to follow instructions. Supporting AMSAT by purchasing the LVB is icing on the cake. My 2 cents.
Best wishes,
LOUIS, KD5GM in EL29kq CW, The original digital mode AMSAT #37061: FIST #3606
Message: 18 Date: Sat, 22 Jan 2011 10:20:10 -0500 From: "Bill Gillenwater" k3sv@pa.net Subject: [amsat-bb] Rotor Interface Yaesu 5500 To: "AmsatBBS" amsat-bb@amsat.org Message-ID: 5E846EAFD8F649CCAAB7DDDDFD2B51A8@billpc Content-Type: text/plain; charset="iso-8859-1"
OK, a newbee question about interfacing rotors. I have a Yaesu 5500 and I run PCSat32. What do I need between the rotor and the computer? I would like a few options. Do I need the Yaesu 232 interface box or will a generic box do the job. If a generic box will work, which are the best for satellite work with PCSat32?
Tnx 73 Bill K3SV
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb