Hi Patrick,
I think I am probably going to stay away from the traveler for now, only because I really enjoy having the recordings available, and it doesn't sound like I can do that with the traveler. I thought about splitting the audio, and I will have to think that through some more before I do that. I did that on one of my TH-G71As and the jack broke... :-( I have been using the 2.5mm jack on the bottom of the speaker mic so far, so I might look into a better mic.
Thanks for the replies!
Zack KD8KSN
-----Original Message----- From: Patrick STODDARD (WD9EWK/VA7EWK) Sent: Saturday, April 16, 2011 10:35 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Re: Heil Traveler and a Recorder
Hi Ted!
Hi Zach, I have a Traveler but I recommend you try one before buying. It just does not do a real good job of staying put, at least on my big Polish head. I am looking for something with full ear cups to replace it. I like its PTT but I have not had any luck tying it to my FT 60 and a recorder. Patrick suggested a Rat Shack adaptor but I have not had a chance to try that yet: a Y adaptor PN: 2102953.
The Y splitter would work for radios like the FT-8x7 types, where the speaker audio is a separate pigtail from the mic jack on the cable for the Traveler headset/mic. The Heil cables for the HTs have a solid plug with the pin(s) for the radio speaker/mic jack(s). In the case of the Kenwood HTs, it's a 2-pin plug. The splitter on the speaker jack (along with an adapter to step down from that splitter's 1/8" or 3.5mm jack to the 3/32" or 2.5mm speaker jack on the HT) won't work without using some other sort of extension cable to bring the mic jack away from the radio a few inches.
I only use my Traveler with either a pair of FT-817NDs or with one FT-817ND along with a TH-F6A, normally for SSB work. I have the Heil cables to work with the 2-pin speaker/mic jacks on Kenwood, Icom, and Yaesu HTs, but have not tried the headset/mic with those radios yet.
I decided to just have the recorder in my pocket or nearby and that seems to pick up my side of the audio for further checking. When I'm real lazy at home, I have my TS-2000 and HRD record the pass and listen later.
As long as you're saying the other station's call during your QSOs, this works well. You won't have the audio from the radio, unless you are not using headphones/earphones on the receiver, but you get the data needed for the logbook.
73!
Patrick WD9EWK/VA7EWK http://www.wd9ewk.net/
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb