Norm Everybody is different as to there common mistakes, but I notice that mine seems to always be that I put a decimal in the frequency when I manually enter modifications with notepad. If you examine very closely I'll bet find that you are making a very subtle change that is easily overlooked. But I could be wrong after all I'm just an Amateur.
73 John KC0BMF
On Fri, Aug 22, 2014 at 11:03 AM, Lizeth Norman normanlizeth@gmail.com wrote:
Why would altering the doppler.sqf file not work with direct modification via Windows Notepad? The symptom is that the frequency is not recognized, although the line in the doppler.sqf file is apparently correct. Going over to the .tle file to check the spelling, spacing and so forth on the satellite name, the bright idea overcame me to find out what happens when I copy and paste the name (obviously the same to the EYE!!!) from the .tle file to the doppler.sqf file. Low and behold, it worked. Nothing in the rest of the line in the doppler.sqf file was altered. I surmise that even though the displayed characters are the same, somehow they are not. What is the formatting issue that I'm running into? This has happened before AND I have not, until today found out why. How do I fix this? I have spent a fair amount of headbanging here. This is just the latest episode. If I looked at the file in a hex editor, I am sure I would not know what to look for. Probably break more than I fix. Norm n3ykf _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb