Hello Dick, the north centered G-5400 has its turning point (= rotor end points) in the South. Therefor check South. With the tracker itself the setting must be done with dip switch #4, see tracker manual. 73s, Erich, DK1TB
----- Original Message ----- From: "Dick Williams" k8ztt@mho.com To: amsat-bb@amsat.org Sent: Thursday, July 10, 2008 1:13 AM Subject: [amsat-bb] SatPc32 question on W0LMD server rotor control setup
In the setup box for the "Server W0LMD" can someone tell me what should be checked in the "Azimuth rotor turns in" box?? The two choices are South and North. I am using the Yaesu G-5400 with a north center.
I can't find anything about the setting in the SatPC32 manual nor the setup section for the W0LMD control box.
Thanks
Dick K8ZTT _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb