Hi folks,
Is there any one that uses the Kenwood TS-2000 and Wisp
Using the internal TNC to RX/TX on Falconsat-3?
I cannot get success. I can RX but cannot TX since there is signal on the SUB Band.
Please can somebody give me the correct settings.
Actually I have the following settings in the radio:
Menu 46 MAIN
Menu 47 9600Bps
Menu 48 TNC BAND
Menu 55 On
On the main band I have set the RX frequency 435.103 FM for the Downlink and
On the Sub Band the TX Frequency 145.840 FM for the Downlink.
The PTT is set on the SUB band.
When the MSPE program starts, I can see the STA and CON LEDs flashing for three times
That indicates me the radio is gone in kiss mode.
I can see the data coming in, but when I go to request the directory or a message the radio does not
Go in TX since there is signal on the MAIN band.
Please what am I doing wrong or which settings is wrong in the radio?
Please any help will be really appreciated.
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
*********************************
****** GSM +39 328 7110193 ******
***** SMS +39 328 7110193 *****
*********************************